Offers the same great experience as the original bubble tubes, but now available in a Medical Grade version using highly durable health-care approved components to satisfy your site's infection control and biomed requirements!
Dimensions: Base - Approximately 22" x 22" x 8"
HDPE Bubble Tube - 48"
Includes security bracket
All medical grade components and fabrication
Some assembly required
Material
Polycarbonate/Acrylic Tube with HDPE Base
Electrical
All electrical components are CE / cUL approved and Medical Grade.
Power Requirement
Standard 120V / 60Hz power supply.
Connect to a standard 110V wall outlet.
Cleaning
Recommended cleaning solution of 50/50 mixture of Hydrogen Peroxide and water and/or a small amount of mild detergent.
Use a soft cloth.
Do not use cleaning products containing isopropyl or ethyl alcohol.
Do not use aerosol sprays.
Do not use abrasive cleaners.
Do not use paper towels, as they may scratch the bubble tube.
Maintenance
Use distilled water only.
Replace the water every three (3) months.
To drain, lift the access cover on the base, extend the drain tube into a floor drain or bucket, and open the drain valve.
Ensure the drain valve is closed before refilling.
Refill with distilled water, leaving approximately 6 inches of space at the top.
Add 1 teaspoon (or a few drops) of bleach with each water change to help prevent algae buildup.
